||Renewables Portfolio Standard
|Eligible Renewable/Other Technologies:
||Solar Water Heat, Solar Space Heat, Solar Thermal Electric, Solar Thermal Process Heat, Photovoltaics, Landfill Gas, Wind, Biomass, Hydroelectric, Fuel Cells, Geothermal Heat Pumps, CHP/Cogeneration, Hydrogen, Anaerobic Digestion, Small Hydroelectric, Tidal Energy, Wave Energy, Ocean Thermal, Renewable Fuels, Biodiesel, Fuel Cells using Renewable Fuels, Microturbines
||Investor-Owned Utility, Rural Electric Cooperative, Retail Supplier, (All electricity suppliers, except municipal suppliers)
|Standard:||24.8% by 2025|
|Technology Minimum:||New Renewables (including thermal energy): 15% by 2025|
New Solar-Electric: 0.3% by 2014
Existing Biomass: 8% by 2015
Existing Hydro: 1.5% by 2015
|Credit Trading:||Yes (NEPOOL-GIS)|
New Hampshire Statutes, Chapter 362-F|
N.H. Admin. Rules, Puc 2500|
New Hampshire’s renewable portfolio standard (RPS), established in May 2007, requires the state’s electricity providers -- with the exception of municipal utilities -- to acquire by 2025 renewable energy certificates (RECs) equivalent to 24.8% of retail electricity sold to end-use customers. The RPS includes four distinct standards for different types of energy resources; these are classified as Class I, Class II, Class III and Class IV.
Class I - New Renewable Energy. This class addresses electricity or “useful thermal energy” generated by any of the following resources, provided the generator began operation after January 1, 2006, except as noted below:
- Wind energy;
- Hydrogen derived from biomass fuels or landfill gas;
- Ocean thermal, wave, current or tidal energy;
- Methane gas;
- Geothermal systems that begin producing thermal energy after January 1, 2013;
- Solar-thermal systems that begin producing thermal energy after January 1, 2013;
- Eligible biomass fuels (including the biomass share of certain generators co-fired with fossil fuels);
- Eligible biomass generators that meet emissions criteria begin producing thermal energy after January 1, 2013;
- Solar-electric energy not used to meet Class II;
- The incremental new production of electricity in any year from an eligible biomass, eligible methane source, or hydroelectric generating facility of any capacity, over its historical generation baseline;
- The production of electricity from Class III or IV sources that have been upgraded or re-powered through significant investment; and
- “Useful thermal energy,” defined as renewable energy delivered from Class I sources that can be metered and for which fuel or electricity would otherwise be consumed.
Class II - New Solar. This class addresses electricity generated by solar technologies, provided the generator began operation after January 1, 2006.
Class III - Existing Biomass/Methane. This class addresses electricity generated by eligible biomass systems up to 25 megawatts (MW), and methane gas, provided the generator began operation before January 1, 2006.
Class IV - Existing Small Hydroelectric. This class addresses electricity generated by hydro facilities up to 5 MW, provided the generator began operation before January 1, 2006, and complies with certain environmental protection criteria; and hydro facilities up to 1 MW that comply with FERC fish-passage requirements and are interconnected to the distribution grid in New Hampshire.
Electric providers must meet the standard according to the following compliance schedule:
Class I increases an additional 0.9% per year from 2015 through 2025. Of the Class I requirement, qualifying renewables producing useful thermal energy must account for 0.2% in 2013 and 0.4% in 2014; the share increases annually by 0.2% from 2015 through 2025.
The New Hampshire Public Utilities Commission (PUC) has established a renewable energy certificate (REC) program utilizing the regional generation information system (GIS) of energy certificates administered by ISO-New England and the New England Power Pool (NEPOOL). RECs from customer-sited sources are generally assigned to the system owner, and behind-the-meter generation located in New Hampshire is eligible to participate in the RPS. However, S.B. 218 enacted in 2012 essentially allows utilities credit towards the RPS for energy production by net metered Class I and Class II resources that have not been certified and registered for the production of RECs. As a result of this law, the PUC must annually calculate the amount of energy produced by such systems based on the total installed capacity and a 20% capacity factor. It must then translate this energy production into a percentage by dividing it by the total amount of retail sales of electricity that are covered by the standard. Obligated suppliers may then claim a credit against their Class I and Class II RPS obligations based on this percentage. For 2012, the Class I credit percentage is 0.0061% (compared to an overall obligation of 3% Class I resources), while the Class II credit percentage is 0.075% (compared to an overall obligation of 0.15% Class II resources).
Unused RECs from the prior two years may be used to meet up to 30% of a given year's compliance targets. Electric utilities may request to enter into multi-year contracts for RECs or electricity bundled with RECs to meet the RPS. Rural electric cooperatives may enter into multi-year contracts without PUC approval.
Generators must be sited within the New England control area, unless the source is located in a control area adjacent to the New England control area and the energy produced by the source is actually delivered into the New England control area for consumption by New England customers.
Compliance reports are due to the PUC by July 1 of each year from each electricity provider. In lieu of meeting the portfolio requirements, an electricity provider may make payments into a renewable energy fund. Class II moneys will only be used to support solar energy in New Hampshire. The rates for each megawatt-hour (MWh) not met for a given class obligation through the acquisition of RECs are:
- Class I: $55.00/MWh in 2013
- Class I Thermal: $25.00/MWh in 2013
- Class II: $55.00/MWh in 2013
- Class III: $31.50/MWh in 2013
- Class IV: $26.50/MWh n 2013
The PUC adjusts these rates annually by January 31 using the federal Consumer Price Index. The PUC is authorized to fine a supplier that violates RPS requirements, to revoke its registration, or to prevent it from doing business in the state. The PUC may accelerate or delay by up to one year any given year’s incremental increase in Class I or II RPS requirement for good cause, and it may modify the Class III and IV requirements for calendar years beginning in 2012.
The PUC must conduct a review of the RPS program and report of its findings to the legislature in 2011, 2018 and 2025, and include any recommendations for changes to the class requirements or other aspects of the RPS.